Tips On How To Plunge Cut With A Hand Wood Router

November 2018 ยท 2 minute read

A plunge cut is a cut that goes in to the the surface of a fabric from above. Plunge-cutting using a router must only be performed with a specific plunge router as well as a plunge-cutting router bit - a router bit with a bottom cut facility, which suggests their cutting edges extend through the bottom with the bit. Other routers are fixed base routers and does not be ideal for making plunge cuts.

Be sure you contain the right sort of router bit. Make sure the bit you ultimately choose is designed to plunge-cut, or, the tip will spin against the top of the material and will probably burn it. Plunge cutting router bits may be labelled as bits which has a bottom cut function, however, if you’re unsure always check the specifications of individual bits before you use them. While using the wrong equipment can harm your machinery and your workpiece.



Set the peak of the router bit. In order to plunge-cut as a result of a specific depth, you need to set the depth in your router before working. How we do that depends upon the company of router you ultimately choose, but most utilize a kind of depth stop (usually a rod and column) that could be adjusted for the height you require. The depth stop limits how far into material the bit could be lowered. The buzz branded routers use a 3 turret depth stop that lets you pre-set 3 separate heights for plunge cutting that may be easily changed as you work.

1. Turn on the router reducing the part down to the workpiece.

Step # 2. Once the bit has cut with the surface, it is possible to move the router to create your selected cut.

Make deeper cuts progressively! Plunging deeper than several millimetres with a single cut really should not be done. Instead, you must make a compilation of shallow cuts which will get progressively deeper. Which means that less strain is put around the cutting edges of your router bit, and on the router’s motor itself.

Take regular breaks. Every now and then you ought to bring the router bit support from the material and turn the router off hence the motor and router bit can cool off, and you may clear any debris in the cut. You should also clear any waste elements through the cut to stop it from becoming clogged. Be sure to make use of an appropriate dust extractor when using the routers.

For more info about industrial cnc router visit this resource.